Our company produces a full range of trailer lighting lighthouse for a variety of indoor and outdoor games in the workplace. A full range of trailer lighting lighthouse is also suitable for China's coal industry, the use of PetroChina, Sinopec, CNOOC, electric power, metallurgy, railway, steel, shipbuilding, aerospace, public security and fire, chemical, government departments and large corporations lighting needs.

    Such lamps, mainly used in outdoor operations, disaster relief, road maintenance, emergency lighting and so on. Lifting divided into: pneumatic lift, hydraulic lift, hand away from lifting categories. Illumination angle is divided into: Remote control operation under the stage, about 270 degrees of rotation, and the upper and lower manual lamps, about irradiation angle. Move: mainly in the generator mounted on a floor below and then fixed on four wheels, easy to carry mobile. For now the industry, the main application generator for Fujian Honda (EC2500CX, EC6500CX) Yamaha generators.

(Full-trailer lighting lighthouse product sample diagram)

First, the performance characteristics

A. Energy-efficient

A full range of trailer lighting floodlighting lighthouse made of aluminum alloy die-casting lamps, light gentle and reasonable, according to illuminate a large area and high tensile stainless steel condenser lighting fixtures, you can adjust the focus and achieve condenser or floodlight switch, when the irradiation distance condenser.

The lighting performance

Lighthouse consists of four full-trailer lighting energy efficient 1000W Philips brand lamp composed may need to be done separately for each head up and down according to the site, about a large angle adjustment to achieve a 360 ° rotating lighting; also be uniform cap on Medallions to four different directions lighting, for four lamp illumination in the same direction, you can press the desired illumination angle and azimuth will flip over 250 ° Medallions overall direction and with the opening of the cylinder as the axis around 360 ° rotation ; distance both overall lighting, lighting, high brightness, large-scale, long-Philips lamp life.

3 lift performance

Comprehensive selection of three trailer lighting lighthouse telescopic cylinder lift adjustment method as a maximum rise height of 4.5 meters; rotating head can be adjusted up and down the beam irradiation angle of light covering a radius of 35-55 meters.

4 works

A full range of trailer lighting lighthouse powered generators can be used directly, can also be connected to 220V mains power for a long time lighting.

5 easy to operate

Can be controlled by a wireless remote control of each lamp on and off within 50 m range, using electric or manual pump can be quickly controlled telescopic rod lift gas.

6 Degree of protection

Medallions, cylinder and generator sets for the overall structure, the bottom of the generator set with caster wheels and rails, can be run on potholed roads and railroad tracks. Overall quality imported metal material, compact structure, stable performance, ensure that a full range of large-scale mobile lighting car to work in a variety of harsh environments and weather conditions, anti-rain, water, wind rating of 8, enclosure rating IP54.

7 customizable

A full range of trailer lighting lighthouse, mobile lighting vehicle based on the individual needs of the city, the standard configuration of this product can not meet the operational needs of users, manufacturers generally can cap the number of rises in height, power, flood or spotlight, telescopic cylinders and generator equipment requirements be adjusted.

Second, the technical parameters

[1] Features

1, the lighting performance: Medallions uses four 1000W energy efficient lamp lighting, high brightness, large coverage, both far and near lighting, lamp life up to 10,000 hours or more, especially for large-scale outdoor lighting operations.

2, lifting performance: comprehensive trailer lighting lighthouse lift rod made of high strength alloy material is refined, can automatically lift adjustment, the maximum rise height of 6 meters; four lamp can be individually adjusted up and down irradiation angle, so that the light cover entire work site.

3, hours of work: the use of imported high-powered generators, gasoline generators once filled nine hours of continuous working time; there is electricity in the place, can also be connected to 220V AC power for long time lighting.

4, we operability: Remote or jog switch and legislation are two ways to control the lift down the lift shaft, simple operation, safe and reliable; wireless remote can control the lifting and standing way down the lift rod within 30 meters range.

5, suitable places: full-trailer lighting lighthouse as a whole using a variety of high quality alloy material, compact structure, stable performance, can work in a variety of harsh environments and weather conditions, wind rating of 8.

6, flexible and convenient: optimized structure design for easy mobility handling, can be easily connected to the trailer to move to any construction, emergency scene.

(Full-trailer lighting lighthouse Application Example Figure)

[2] Use

1, install U-bracket

Body side door open, remove the hex screws on the rear body mounting position.

The U-shaped bracket erected at the rear of the vehicle installation location, locate a U-shaped bracket pin on the left.

Hexagon screws with a U-shaped bracket in the vehicle tail.

2, the installation towbar

With support from the top front part of the body, and then open the vehicle door.

Round bolt with a wrench inside the trailer lighting lighthouse body fixed L-bracket is screwed, and then out of the L-shaped bracket.

The drag rod into the body, bolted inside the body, then lower the front feet, adjustable support legs to the right height, and then plug the fixed pin.

The interior of the chains out, hanging on the hoop at both ends of the bottom of the car, and then tied with a chain hooked tow bar; finally out of support.

3, the installation feet

Unplug the rear sides of the car after the fixed feet latch, pull the support leg to the appropriate location, and then plug the fixed pin.

After shaking joystick support foot height adjustment, make the wheels off the ground, to support the body weight falls on the foot.

4, installation lighthouse lift rod

The full range of trailer lighting lighthouse lifter body carried to the top, placed into the U-shaped bracket, ensure that plug is inserted within the U-shaped bracket positioning holes lifting rod.

The six core cable lift rod, four-core cable were introduced through a large body on small Gulen joint body, and in accordance with the cable connected icon, note one correspondence between the cable; installation note Shang Hao packing, tighten the Gulen joints to ensure sealing effect.

When installing two cables, you should pay attention to the outside of the body left 15-20CM margin, so as not to lift the rod lift cable force.

5, the installation of wire rope

Remove the full-body front wheel trailer lighting lighthouse above two locating pins and the front pulley lift rod and pin.

The round wire rope winch trailer lighting lighthouse on the car body through the square hole at the bottom of the body position of the pulley, the pulley pulled from under the tank site, and then bypass the pulley removed from the front of the lift lever and pulley mounted on the lift the distal end position of the lever, and then back to the upper portion of the wire rope the bottom hole of the vehicle body with the pulley and the rope fixing pin. Chuck direction taken to ensure that the rope toward the front, and to ensure that in the clamped state, not loose.

Installed above the lift rod pin holes of the front pulley, the pulley rope to prevent shedding.

6, install lamp

Unscrew the top of the lift rod cap bolts fixed beam; then adjust the four lamp mounting bracket caused by the horizontal position.

The four lamp in turn fixed to the crossbar.

The four input cable access lift rod cap on top of the junction box, press the icon requires good line; note the order of the four lamp's wiring.

Installed junction box cover.

[3] Notes

1, adjusting the horizontal instrument

Adjust the height of three feet, so that the level meter drop to the middle position.

2, for refueling generators, oil

In accordance with the specification requirements refueling generators, oil.

3, start the generator set

Follow the instructions to start the generator set generator set.

Body side door must be opened after two generators started, in order to facilitate air convection.

4, raising inspection telescopic rod

According to lighting requirements, adjust the lamp illumination angle; lamp can be found in the four level 360 °; adjust illumination angle up and down 180 ° range.

Remove the retaining pin of the vehicle body front portion.

Check the height of the lighthouse in the top 13 meters without any obstacles.

Check the wire rope in good condition; check all fixed pin, bolt security lock.

(Full-trailer lighting lighthouse Products Figure)

5, erected telescopic rod

Open round the lighthouse car trailer lighting control panel, the operation to convert on the control panel switch to vertical / inverted position.

Pressing the red dot switches, inching lift rod erected; When pressed for 3 seconds after lift rod starts moving state long, continuous lift rod erected.

When the lift rod fully erect again, press the red button to turn off the motor; then fixed pin trailer lighting before the round part of the lighthouse cabin lift rod is inserted and fixed.

A full range of trailer lighting lighthouse and more product details, please visit our Web site and collections：http://www.wxgallo.com/