First. small miniature pneumatic lift lever Introduction
Application of small miniature pneumatic lift rod products are widely available, there is extremely important in all areas of communications, disaster relief, and military role. Wuxi Little Gallo technology production of miniature pneumatic lift rod has a light texture, strong bearing capacity, bending, anti-torsion resistance, good linearity characteristics. Such small miniature pneumatic lifter Simple operation, landing rapidly. Site selection and flexible, good reliability, suitable for car or base communications. Due to the orientation of the pipe wall is installed, a small miniature pneumatic lift rod has a good orientation function. I produced a small miniature pneumatic lifter product design is reasonable, simple, affordable, manual lifting, easy to operate, saving time and effort. Wuxi Little miniature pneumatic lifter Gallo technology products are exported all over the country.
(Small miniature pneumatic lift rod product images)
Second, small miniature pneumatic lifter technical indicators
A collection Height: customized according to customer requirements
2 Total elevated height: customized according to customer requirements
3 Installation: customized according to customer requirements
4 Materials: small miniature pneumatic lift rod made of high strength aluminum-magnesium alloy extrusions, strong corrosion resistance; cylinder walls using high-pressure treatment process seal wear and porcelain join.
5 packing properties: a high level of sealing performance, the stationary state 24 hours lifting mast fell less than 10mm. Small miniature pneumatic lift rod using piston stroke swing inflatable structure that heavy use of high-strength piston graphite-containing PTFE; All driveline is closed between the rod and the rod small miniature pneumatic lift lever rubber ring seal (this ring seals imported from Japan NOK), waterproof sand performance, strong corrosion resistance;
6 Surface treatment: hard anodized aluminum-magnesium alloy increases the intensity profiles;
7 wind resistance: small miniature pneumatic lift rod rod using circular cross-section, in the same installation space, circular cross-section can provide higher strength, stiffness, torsional and bending ability ability; wind 8; has anti-rotation feature, working pressure:. <0.30 Mpa.
8 small miniature pneumatic lift rod structure with built-in line: I first realized the device control and power cables inside the lift rod fixed at the earliest to achieve the lift rod internal alignment, further on in the use of performance and aesthetics .
9 car lift mast is through the roof fixed, or installed in vehicles surrounding and supporting frames by dragging the disc and joint fixation. Customer equipment selection, car lift mast should be determined according to the different type of the original height of the top of the mounting surface height. When mounted on top of the resulting product, the original height of the shortest, to ensure that the body has a maximum height as far as possible by reducing the resistance and drag of the device.
(Small miniature pneumatic lift rod product images)
Third, small miniature pneumatic lift lever pre-service
We accept small miniature pneumatic lifter product customization and OEM production needs. Even with a standard product, due to different customers different requirements, some indicators are not the same concern. As long as you make about the parameters required little miniature pneumatic lift rod from total height, shut height, wind resistance, vertical load, partial load, lifting time,, yaw to the power requirements of form, weight, installation methods, we are responsible for you customize a part of your special little miniature pneumatic lifter.
Fourth, small miniature pneumatic lifter service
Wuxi Gallo Technology technical staff can arrange for you to guide the installation. Warranty: One year replacement, a three-year warranty and lifetime maintenance (within 48 hours to reach the scene).
More small miniature pneumatic lifter product information, please Wuxi site collection Gallo technology
:http://www.wxgallo.com/
Elevator needs to communicate Table
Dear Customer:
In order to give you the best technical solution, the optimal configuration of quotes and most efficient service, please fill in the following information.
Customer Contact
Company Name
Name
Contact
Duty
Mailing Address
E-mail
1.-related technical information
1.1 lifting load equipment installed on the stand:
Weight 1.2 load equipment: kg
Frontal area 1.3 load equipment: × c㎡
As part of the hollow space than the real
1.4 pairs of load equipment in the elevator installation requirements:
2 requirements for elevator
2.1 Lifting height expansion bracket: m
2.2 Elevator closed height: m
2.3 Lift Stand weight: less than kg
Are 2.4 elevator rope to pull the wind: □ □ Do not want
2.5 Lifting time: min
The maximum wind speed 2.6 allows the elevator load at work: Class or m / s
2.7 The maximum steady-state operating conditions on the lifting bracket wind dynamic requirements:
□ Yes □ No
If yes, please state: rock volume: cm, torsion angle: °
2.8 Elevator withstand wind speed limits: Class or m / s
2.9 Elevator Installation:
Ground-mounted □ □ □ car installation car installation
2.10 pairs compressor requirements: Voltage: V
□ □ AC DC:
2.11 Lifting bracket Working temperature: ℃
2.12 Demand quantity: root expect cycle: days
3 Other special requirements or need accessories (can be attached page description)
(Photo: raw material for the production of lift rod products)
