Medium Medium pneumatic lift rod pneumatic lifter manufacturers

    Medium pneumatic lift lever wide range of uses, Wuxi Gallo technology has long been committed to the research and development of aerodynamic lift rod products, the formation of multi-family, multi-species product structure, at present, our products are sold throughout the country.

    Wuxi variety of pneumatic lifter Gallo technology products have been widely used in aerospace, telecommunications, telecommunications, military, television, on-site lighting, fire and lightning protection equipment, such as mobile. Such pneumatic lift rod is simple, rapid ups and downs. Site selection and flexible, good reliability, suitable for car or base communications. Medium pneumatic lift lever has a light texture, strong bearing capacity, bending, torsional resistance, good linearity characteristics. Since the orientation of the pipe wall is mounted, has a good orientation function. This medium-sized pneumatic lifter product design is reasonable, simple, affordable, manual lifting, easy to operate, saving time and effort.

(Pneumatic lift rod Products)

From the working principle and technical features, this mid-sized pneumatic lift cylinder rod is equivalent to a multi-section cylinder. When using the medium pneumatic lift rod into the cylinder through the injection and exhaust air, in order to achieve various sections of the cylinder up and down movement.

    Medium sections pneumatic lift cylinder rods are made of high quality aluminum alloy material, the entire manufacturing process through extrusion, drawing, honing, machining, anodizing and other multi-channel technology, and undergo a rigorous inspection process, to ensure the quality of the cylinder.

    To understand the structure of multi-section lift cylinder case, a detailed multi-section lift cylinder structure. The advantages of multi-section of medium lift cylinder pneumatic lift lever is: simple structure, sophisticated manufacturing process, and therefore easy to use, stable performance.

Medium lift rod pneumatic cylinder specifications are in accordance with the number of different sections, the biggest festival diameter, initial height, maximum height and determined. Multi-section cylinder different specifications of different technical performance.

(Pneumatic lift rod Products)

We provide professional services include:

1, pre-service: We accept medium-sized pneumatic lifter product customization and OEM production needs. Even with a standard product, due to different customers different requirements, some indicators are not the same concern. As long as you make on medium pneumatic lift lever parameters required from the total height, shut height, wind resistance, vertical load, partial load, lifting time,, yaw to the power requirements of form, weight, installation methods, we are responsible to you customize a part of your special pneumatic lifter.

2, after-sales service: We can arrange technical staff to guide the installation. Warranty: One year replacement, a three-year warranty and lifetime maintenance (within 48 hours to reach the scene).

Medium pneumatic lifters and more products, please attention and collections Wuxi site Gallo technology

：http://www.wxgallo.com/

(Photo: Packaging outgoing pneumatic lift rod products)

Elevator needs to communicate Table

Dear Customer:

   In order to give you the best technical solution, the optimal configuration of quotes and most efficient service, please fill in the following information.

 Customer Contact

Company Name

Name

Contact

Duty

Mailing Address

E-mail

1.-related technical information

 1.1 lifting load equipment installed on the stand:

 Weight 1.2 load equipment: kg

 Frontal area 1.3 load equipment: × c㎡

     As part of the hollow space than the real

 1.4 pairs of load equipment in the elevator installation requirements:

2 requirements for elevator

 2.1 Lifting height expansion bracket: m

 2.2 Elevator closed height: m

 2.3 Lift Stand weight: less than kg

 Are 2.4 elevator rope to pull the wind: □ □ Do not want

 2.5 Lifting time: min

 The maximum wind speed 2.6 allows the elevator load at work: Class or m / s

 2.7 The maximum steady-state operating conditions on the lifting bracket wind dynamic requirements:

    □ Yes □ No

    If yes, please state: rock volume: cm, torsion angle: °

 2.8 Elevator withstand wind speed limits: Class or m / s

 2.9 Elevator Installation:

    Ground-mounted □ □ □ car installation car installation

 2.10 pairs compressor requirements: Voltage: V

    □ □ AC DC:

 2.11 Lifting bracket Working temperature: ℃

 2.12 Demand quantity: root expect cycle: days

3 Other special requirements or need accessories (can be attached page description)

(Application examples pneumatic lift rod products)